A Big Product Launch in Changzhou
SVOLT held its 2026 Global Partner Summit on July 16 in Changzhou. The theme was Chain Collaboration, Co Creation and Win Win. The company used the event to launch a whole new lineup of products for both EVs and energy storage. The biggest news includes the Blade 3.0 battery, a hybrid solid state 6C superfast charge cell, a new LFP HEV battery pack, and confirmation that Fly Laminate 4.0 stacking tech will enter mass production before the end of 2026. That system handles 16 layers at once and doubles stacking throughput.
Two New Cells Tackle the Charging Problem
Blade 3.0 for Mainstream Fast Charging
The Blade 3.0 uses a 130+ Ah cell with 181 Wh per kg energy density. It delivers over 650 km of driving range on a single charge. But the real story is the charging speed. It supports a peak 10C rate with an average of 8C. That means 10 to 80 percent SOC in just 5.25 minutes and 10 to 97 percent in 8.5 minutes. Range anxiety and long charging waits become a thing of the past. SVOLT says this brings premium fast charging to mainstream vehicles at a cost that makes sense for volume production.
Hybrid Solid State 6C for Premium EVs
On the ternary side SVOLT introduced its first hybrid solid state 6C cell built for mass production. The 150+ Ah cell supports a 120+ kWh pack and pushes range past 750 km. Energy density is 233 Wh per kg. With an 8C peak charge rate it goes from 10 to 80 percent SOC in 7 minutes. The hybrid solid liquid design cuts thermal runaway risk by 25 percent and reduces cell to cell pressure variation by 18.5 percent. Mass production starts in Q3 2027.
New HEV Battery Pack for Hybrids
SVOLT also showed a 5.1 kWh LFP HEV battery pack for the growing hybrid market. It uses 16.4 Ah cells with 130+ Wh per kg energy density. The pack delivers a 50C pulse discharge rate and lasts over 40,000 cycles. It works across a wide temperature range from minus 40 to 60 degrees Celsius. That makes it a strong option for hybrids operating in extreme climates.
Energy Storage Lineup Gets a Full Refresh
SVOLT updated its entire energy storage product line across four segments. All of them benefit from Fly Laminate 4.0 stacking and hybrid solid state safety architecture.
Residential storage uses 122 and 120 Ah stacked cells with better cycle life and thermal stability.
C&I storage comes as a 285 kWh Cell to Rack integrated system for easier deployment.
Utility scale storage is a 6.29 MWh CTR battery container built for grid level energy shifting.
AIDC and UPS applications get 90 and 102 Ah hybrid solid state cells for critical backup power.
SVOLT also showed its sodium ion technology as a backup path for large scale storage. The idea is to target grid frequency regulation and renewable curtailment reduction with lower cost longer duration solutions.
Fly Laminate 4.0 Is the Manufacturing Advantage
The thing that makes all these products possible is Fly Laminate 4.0. It is the industry's first stacking process that handles 16 electrode layers in a single pass. That doubles the efficiency of conventional stacking and cuts capital spending per gigawatt hour while improving alignment and defect control. Volume delivery starts later this year. SVOLT is positioning itself as both a battery innovator and a manufacturing powerhouse that can take lab breakthroughs to high volume production.
What It All Means
The summit showed a clear direction. SVOLT is pushing hard on charging speed, safety, and manufacturing scale. As the industry moves from treating batteries as components to treating them as platforms, SVOLT is betting on vertical integration and process innovation. The company is backing that bet with real product roadmaps and delivery dates.
Welcome to contact us:
WhatsApp/Wechat/Mobile: +86 13332949210
Email: info@xihobattery.com
Website: www.xihobattery.com
Ready to power your energy systems with the best in the industry?
Contact us today to get the latest pricing and discuss your needs with our team!
